FLAMETOYS 8月 风雷模型 OPTIMUS PRIME擎天柱 官博素组测评

红色的风楼主LV11.传奇

2018-08-15 15:35 发布于 未知

1楼
本帖最后由 红色的风 于 2018-8-15 17:47 编辑



This time I will introduce the product while making the model kit of OPTIMUS!!
※By the way, I am a model kit beginner

To first, shoot the package. The box size is approximately W31×D19×H8cm.


The first thing to check after unpacking is checking to see if any accessories are missing!It is very important so do not forget it!!


The runner parts are divided for each color, and I think that the instructions do not worry because it is full color.

Although there is explanation as "simple assembly", I think that it is really simple whether the author of the model kit beginner will experience it!! I wish modellers watch warmly.


There is FLAMETOYS logo on the runner and the number of runner next to the logo.



I assemble in order Body→head→arms→legs and combine these at the end.

Because I'm a "super" beginner, it took about 1 hour to make its body and head.
The point that I personally struggled is the sticker sticking work.I sloved it by using a toothpick.


I think there are people who notice when cutting the runner, but indirect parts are molded slightly softer.This soft part enables smooth posing. For example, like this parts.


Here is a part from shoulder to arm. Shoulder and elbow range of motion is outstanding!!



Part of legs,although the number of parts will increase a little, the movement range of knee,ankle and toes is enough!! Of course, the tires also tune!!



Joining method is very simple.You should only adjust the round convex into round dent. Especially indirect parts are made of soft parts as mentioned above and it is fine even if it pushes deeply.



And, finally the whole picture reveals...!


It will be understood at this point that the hip joint,waist,breast and neck is well operated!! It works well, but it's a model kit!

We were paticular about that OPTIMUS' eyes and the window are injected with clear parts.Because it is hard to understand with the photograph, please confirm with the real product by all means!!

Since different parts are prepared for the hand, use this part if you want to use weapons. OPTIMUS can also have weapons on hand, so please enjoy it in your favorite way.


As the time is limited, the assemble review is over.I think that it was a little unsatisfactory for modelers, but thank you for reading to the end!!

Since the product is scheduled to ship in September, please wait for a while until arrival.


© 2018 Hasbro.All Rights Reserved.
28

点个赞吧~(1)

pjxgundamLV8.钻石玩家

2018-08-15 18:03 发布于

2楼
板件不多啊,大号hg
eohbabyLV6.黄金玩家

2018-08-15 18:11 发布于

3楼
这么一看任何购买兴致都没了
红色的风楼主LV11.传奇

2018-08-15 18:49 发布于

4楼
pjxgundam 发表于 2018-8-15 18:03 板件不多啊,大号hg
H的确和HG差不多
凿灼LV5.白银玩家

2018-08-16 10:00 发布于

5楼
换头高达嘛
紫云饭团LV4.高级玩家

2018-08-16 10:31 发布于

6楼
Optimus招牌就是胸口2个超大肌霸,彪显扛把子本色。


我猜这个版本的企划是小日本的吧 ?一点都没有原来我印象里的那种阳刚的味道。



当然好不好是个人喜好问题 ,至少我个人觉得这版相比原版有点太娘炮了 ,身材太苗条了 。
hc102288LV5.白银玩家

2018-08-16 10:35 发布于

7楼
多少钱?
FunkyMusiC1023LV4.高级玩家

2018-08-16 11:41 发布于

8楼
这材质看上去就和小学校门口卖的十几块钱的山寨货一样。
逆袭的田螺LV2.初级玩家

2018-08-16 12:05 发布于

9楼
这个可以有
裆里有腊肠LV6.黄金玩家

2018-08-16 12:24 发布于

10楼

terry_78LV7.铂金玩家

2018-08-16 12:32 发布于

11楼
畸形柱
竹马小蜻蜓LV6.黄金玩家

2018-08-16 12:38 发布于

12楼
高达不高达 柱子不柱子
mayiweiLV5.白银玩家

2018-08-16 14:27 发布于

13楼
三角奶,还不能变形
hEo牛囝LV6.黄金玩家

2018-08-16 14:30 发布于

14楼
可以喊“噢噢啦噢啦。。。。”
星星叫LV7.铂金玩家

2018-08-16 14:58 发布于

15楼
太高达了,不太能接受
无喱个人LV7.铂金玩家

2018-08-16 15:59 发布于

16楼
紫云饭团 发表于 2018-8-16 10:31 Optimus招牌就是胸口2个超大肌霸,彪显扛把子本色。




奇哉怪也,貌似国人初始印象中的G1柱哥其机设(无论玩具还是动画)均是日本人搞出来的吧?

所以,地方审美是同一地的,大不了就是换了个设计师,何来的日本人之外的原版阳刚味?







QuantaZEROLV6.黄金玩家

2018-08-16 16:23 发布于

17楼
这就差下巴点个红点了。。。
abyssdragonLV4.高级玩家

2018-08-16 16:34 发布于

18楼
有种娘化柱子哥的感觉
黑豹adgLV6.黄金玩家

2018-08-16 17:30 发布于

19楼
大家都不喜欢么?我个人感觉还是不错的,舍弃变形走胶达高可动对我的胃口。造型就另说了,人各有爱,这款擎天柱还是很美观的啊!后续的红蜘蛛才是真丑!一看就是个基佬……
预定200出头,希望品质对得起这个价格才好啊!
star2015LV6.黄金玩家

2018-08-16 18:15 发布于

20楼
大部分人还是不喜欢的吧,小众产品
红蜘蛛大教主LV2.初级玩家

2018-08-16 18:56 发布于

21楼
真TM丑 我选红蜘蛛

图片选择

努力修改中₍₍ (ง ˙ω˙)ว ⁾⁾